Multi Pack, your partner in filling and packaging machines.

I. V. Bottle Filling Line – Leak Testing Machine, Sticker Labeling Machine

Leak testing machine (pressure testing) manufactured by M/s.  Multipack Machinery .

It is very much suitable for testing any pin holes left out during the forming and the filling in FFs bottle pack machines. Basic principle of the machine is to rotate the flexible Bottles under pressure in such a way that it covers the entire surface area of the bottle. This machine can be installed just before the Visual inspection – Labelling Machine packing line.

Sometimes there are changes of having a very minute pin hole which cannot be detected in norms course, but when it passes through the machine under pressure this pin holes is immediately open and given the spray, that is, how this machine ensures that there is no leakage or pin holes in the bottleThe Leakage Tester is intended for testing the leakage of sterile solutions filled in flexible IV bags after autoclaving

Applications:
Our bottle filling line-leak testing machine is widely applied in industries including pharmaceuticals, cosmetics, pesticides, dairy products, edible oil, lubricants, distilleries, and many more industries where ROPP cap sealing is highly in demand.
v  Should be suitable for 100% testing of leakage with capacity of at least 60 bpm

v  Should be suitable to test the leakage of at least 6 IV bags containing around 1020 ml capacity at a time

v  Should have display system for results and control of parameters

v  Should be suitable for integration to production line such as inspection instrument

v  Should be pressure based system for testing and monitoring of leakage of filled IV bags

v  Leak Measurement by Differential Pressure Decay or similar mechanism

v  Pressure Range: 0.1 – 10 bar

v  Unit Adjustable (Bar, Kpa, Mpa, PSI

v  Leak range –  500 to +500PZ

  • 1000 to +1000Pa
  • 5000 to 5000Pa

v  Maximum Resolution 1 Pa

v  Linearity <0.5% of full Scale

v  Accuracy 0.5% of measured Value +2 digit

v  Should be fitted with containing mechanism for holding leaked solution

v  Should be easy for use, cleaning and maintenance

v  Should be compact in size with overall dimension be specified

v  Minimum and maximum operating pressures should be specified

Description:
The Inspection table is equipment consisting of a two (Single Side seating arrangements) or three (Double Side seating arrangements) tracks conveyor with a hood with lighting arrangement and visual inspection background of alternate black & white colour.
Operation:
The central conveyor belt brings the Bottle from the capping/washing machine conveyor. These Bottles are automatically bifurcated on the two adjoining conveyor belts & further on the side tables for operators sitting on either side of the table. The operators in turn pick up the Bottles & visually inspect the Bottles in the alternate white & black background to check for any partials in the Powder filled, sealed & breakage of Bottle. After inspection the Bottles are placed in the central track, which is transfer for labelling.

  • Black & White (Both) Screen per seat.
  • Height adjustable 800 mm ± 50 mm.
  • Provision for Tube light fitting.
  • S.S. Belt size: 90mm [W].
  • S.S. Top 18 Gauge. 304 Quality
  • Speed Variable A/c Drive System.
  • Structure 1.25 S.S. Square pipe.
  • 3 Phase, 3/4 HP. Motor with gear box.
Automatic Horizontal Top Sticker Labelling Machine Model No. SBHSL – 150 GMP Model
(Photograph is for the reference purpose only. Machine Construction & Specification are subject to change without prior Notice due to Continues up-gradation Process) 
Description:
The Automatic Horizontal Top Sticker Labelling Machine Model SBHSL – 150 is one of the most users friendly.  The Machine incorporates latest sophisticated Micro Processor Control Label Dispensing system with user friendly Sensing system for Label and Product. Machine suitable for Aluminium, Glass, Plastic Bottles/ Small Cartons / Batteries / Pouches/Plates/Paper sheet etc.

Top labeller delivers accurate and high speed repeatable Labelling. Easy to reach hand wheel adjustment and side rail quickset adjustment means more “up-time” on your production line! Bhagwati gets it. Shows it and proves it in the versatile pro series top labeller. Armed with the newest and fastest Netcom control technology, it lights-up the “one touch” bright digital display screen for quick set-up.

The labeller series is suitable for a wide range of flat package applications. The different sizes are accommodated where best-in-class reliability is the mandate for producing efficiently.

Specifications:
Label Height 8 mm to 90 mm Standard
Label Length 12 mm to Unlimited
Label Roll Dia. 300/400 mm
Core Dia. 75/76 mm
Electrical 220 VAC Single Phase Power Supply (50/60 Hz)
Power 1.2 Amps.
Capacity 0.5 Kw
Speed Up to 60 labels per minute – depending on product and Label size
Conveyor Height 865 -960 mm
Salient Futures:
  • No label data input/retrievals require for any label size
  • No change parts for label size
  • Single pot on-line speed variation control
  • Synchronized speed of label dispensing, conveyor and pressing device
  • Virtually maintenance free machine
  • User-friendly label placing adjustments
  • Self protected against voltage fluctuations
  • Suitable for on-line Ink-Jet and Contact Coding System
  • Suitable for partial, full wrap around and overlap labelling
  • Built in A. C. variable frequency drive system
  • Fully stainless steel finish machine and also frame structure